Murray Parklander MT60 Lawn Mower Manual

The Murray Parklander MT60 is a 60-inch zero-turn riding lawn mower designed for residential and light commercial use. It features a powerful engine, hydrostatic transmission, dual-lever steering for zero-turn maneuverability, a reinforced steel cutting deck, adjustable cutting height, comfortable high-back seat, and a large-capacity fuel tank. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. Controls and Operation 4. Specifications 5. Maintenance Schedule 6. Cutting Deck Adjustment 7. Storage & Winterization 8. Safety Features 9. Warranty Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 60-inch reinforced steel cutting deck, Hydrostatic transmission, Dual-lever steering controls, High-back operator seat, Engine hour meter, Deck washout port.

Feature	Description
Cutting Deck	60-inch reinforced steel, 3-blade system
Transmission	Hydrostatic, zero-turn capability
Steering	Dual levers for independent wheel control
Engine	Powerful V-twin engine (specific model varies)
Cutting Height	Adjustable from 1.5 to 4.5 inches
Fuel Tank	Large capacity for extended operation
Seat	High-back, adjustable for operator comfort
Hour Meter	Tracks engine usage for maintenance
Deck Wash Port	For easy cleaning after use
Parking Brake	Engages automatically when levers are in neutral

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

Install steering levers: Attach to control panel per diagram.
Attach seat: Bolt seat assembly to frame.
Connect battery: Attach cables (red positive, black negative).
Add engine oil and fuel: Use recommended types (see Specifications).
Check tire pressure: Inflate to recommended PSI.

WARNING! Mower is heavy; use assistance during assembly. Ensure all bolts are tightened securely.

Controls and Operation

Familiarize yourself with controls before starting.

Pre-start check: Verify oil and fuel levels; clear deck of debris.
Starting: Sit in seat, engage parking brake, set throttle to choke (cold start), turn key.
Driving: Disengage parking brake, slowly move levers forward/backward to move.
Turning: Move one lever forward and the other back for zero-turn.
Mowing: Engage PTO (blade control) lever once engine is at full throttle.
Stopping: Disengage PTO, return levers to neutral, engage parking brake, turn key off.

CAUTION! Always operate from the seat. Keep hands and feet away from moving parts.

Specifications

Model: Murray Parklander MT60
Cutting Width: 60 inches
Engine: V-twin cylinder, OHV (exact HP varies by model year)
Transmission: Hydrostatic, zero-turn
Fuel Capacity: Approximately 3.5 gallons
Cutting Height Range: 1.5 - 4.5 inches (adjustable in 0.5-inch increments)
Tires: Front: 13 x 5.00-6, Rear: 20 x 10.00-8
Weight: Approximately 650 lbs (without operator)
Recommended Oil: SAE 10W-30
Recommended Fuel: Unleaded gasoline (87 octane minimum)

Maintenance Schedule

Regular maintenance ensures longevity and performance.

Interval	Task
Before each use	Check tire pressure, fuel/oil levels, clear deck of debris
Every 8 hours	Check belts for wear and tension
Every 25 hours	Grease fittings, check battery terminals
Every 50 hours	Change engine oil, clean/replace air filter
Every 100 hours	Change oil filter, check spark plugs
Seasonally	Sharpen/replace blades, check tire condition

Tip: Always disconnect spark plug wire before performing any maintenance.

Cutting Deck Adjustment

Adjust cutting height to suit lawn conditions.

Park on level surface, turn off engine, engage parking brake.
Locate deck lift lever (usually on right side of operator).
Move lever to desired height setting (1.5 to 4.5 inches).
Check level: Measure from ground to blade tips on both sides; adjust if needed using deck leveling rods.

WARNING! Ensure blades have completely stopped and spark plug is disconnected before adjusting or servicing deck.

Storage & Winterization

Proper storage prevents fuel system issues.

Clean mower thoroughly, especially under deck.
Add fuel stabilizer to tank and run engine for 5 minutes.
Change engine oil and filter.
Remove battery, clean terminals, store in cool, dry place on a trickle charger.
Store in a dry, covered area.

CAUTION! Do not store with fuel in tank for more than 30 days without stabilizer.

Safety Features

Operator Presence System: Engine stops if operator leaves seat with PTO engaged. Parking Brake: Automatically engages when steering levers are in neutral. Blade Brake Clutch (PTO): Stops blades within seconds of disengagement.

Warranty Information

Limited warranty covering defects in materials and workmanship. Residential use: 2-year limited warranty. For details, see your Murray dealer or warranty card. Keep your proof of purchase.

Regulatory Information

This machine complies with ANSI/OPEI B71.1-2012 safety standards for ride-on lawn mowers. Engine emissions comply with EPA Phase 3 and CARB regulations. Copyright © Murray LLC. For support, visit www.murray.com or contact 1-800-MURRAY-1.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, safety switch	Charge/replace battery; add fuel; ensure you are seated and PTO is disengaged.
Uneven cutting	Deck not level, dull blades	Level the deck; sharpen or replace blades.
Loss of power	Clogged air filter, old fuel	Clean/replace air filter; drain old fuel and refill.
Mower vibrates excessively	Damaged or unbalanced blade	Stop engine, inspect blades for damage, replace if necessary.
Hydrostatic transmission sluggish	Low hydraulic fluid, air in system	Check fluid level; bleed system per manual.

Reset: For electronic issues, disconnect battery for 5 minutes then reconnect.

Service: 1-800-MURRAY-1; www.murray.com