Murray Parklander 2690999 Lawn Mower Manual

The Murray Parklander 2690999 is a 22-inch push lawn mower featuring a 190cc Briggs & Stratton engine, 3-in-1 mulching/bagging/side discharge capability, single-lever height adjustment (6 positions: 1.25"-3.75"), durable steel deck, easy-start system, large rear wheels for maneuverability, and a 2.1 bushel grass bag. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Cutting Height Adjustment 7. Mulching & Bagging 8. Safety Features 9. Maintenance & Storage 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 190cc Briggs & Stratton engine, 22-inch steel cutting deck, 3-in-1 function, single-lever height adjuster, rear bagger, and easy-start system.

FeatureDescription
Engine190cc Briggs & Stratton 4-cycle engine
Cutting Width22 inches
Cutting Height6 positions (1.25" to 3.75")
Deck MaterialDurable powder-coated steel
Drive SystemPush (manual)
Grass Bag Capacity2.1 bushels
WheelsLarge 8-inch rear wheels for easy rolling
3-in-1 FunctionMulch, Bag, or Side Discharge
StarterRecoil easy-start system
WeightApproximately 65 lbs

Assembly Instructions

Unpack and inspect all parts. Assembly requires basic tools (included).

  1. Attach handle: Align lower handle with deck brackets, secure with provided bolts and wrench.
  2. Install grass bag: Hook bag onto rear deck brackets; ensure secure attachment.
  3. Attach discharge chute: For side discharge, snap chute into opening on right side of deck.
  4. Install mulching plug: If mulching, insert plug into discharge opening.
  5. Add engine oil: Briggs & Stratton engines are shipped without oil. Add SAE 30 detergent oil (approx. 20 oz) to fill line on dipstick.
  6. Add gasoline: Use fresh unleaded gasoline. Do not overfill.

WARNING! Always wear gloves during assembly. Ensure all bolts are tightened securely.

First-Time Setup

Before first use, complete final checks and safety procedures.

  1. Check oil level: Ensure oil is at full mark on dipstick.
  2. Check tire pressure: Inflate tires to 20 PSI for optimal performance.
  3. Adjust cutting height: Set lever to desired height (recommend 2.5" for first mow).
  4. Select function: Install bag, mulching plug, or side discharge chute as needed.
  5. Start engine: On flat surface, set throttle to FAST, pull recoil starter firmly.

CAUTION! Never add fuel while engine is hot. Allow engine to cool for 5 minutes.

Specifications

Controls and Operation

Handle Controls: Throttle lever (FAST/SLOW/STOP), Recoil starter grip, Handle height adjusters.

Deck Controls: Single-lever height adjuster (left side), Bag attachment lever, Discharge chute lock.

Starting Procedure: 1. Check oil and fuel. 2. Set throttle to FAST. 3. Prime engine (if equipped). 4. Pull recoil starter firmly. Stopping: Move throttle to STOP. Wait for blade to stop completely. Operation Tips: Mow when grass is dry. Overlap passes by 2 inches. Change mowing pattern weekly.

Cutting Height Adjustment

Use single lever on left side of deck to adjust all four wheels simultaneously.

  1. Stop engine and wait for blade to stop.
  2. Pull lever toward wheel to unlock.
  3. Move lever to desired height setting (1-6).
  4. Release lever to lock in position.
  5. Check that all wheels are at same height.

Tip: For healthy turf, never cut more than 1/3 of grass height at one time.

Mulching & Bagging

3-in-1 system allows quick conversion between functions.

  1. Mulching: Install mulching plug. Grass is cut finely and returned to lawn as fertilizer.
  2. Bagging: Attach grass bag. Collects clippings for disposal.
  3. Side Discharge: Install discharge chute. Ejects clippings to side for raking.

WARNING! Always stop engine before changing functions. Ensure attachments are securely locked.

Safety Features

Blade Brake Clutch: Stops blade within 3 seconds when handle is released. Safety Key: Prevents unauthorized operation. Discharge Guard: Shields discharge opening. Warning Labels: Important safety reminders on deck and handle.

Maintenance & Storage

Regular maintenance ensures long life and optimal performance.

After Each Use: Clean underside of deck. Check blade for damage. Monthly: Check oil level. Inspect air filter. Seasonal: Sharpen or replace blade. Change oil (every 50 hours). Clean/replace spark plug. Storage: Drain fuel or add stabilizer. Store in dry place covered.

CAUTION! Always disconnect spark plug wire before performing maintenance.

Warranty Information

Murray Parklander 2690999 comes with a 2-year limited warranty covering defects in materials and workmanship. Warranty does not cover normal wear, misuse, or lack of maintenance. For warranty service, contact Murray customer service at 1-800-800-7310 or visit www.murray.com. Keep original receipt as proof of purchase.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startNo fuel, old gas, clogged filterAdd fresh fuel; check fuel line; clean/replace air filter.
Engine runs poorlyDirty air filter, old oilClean air filter; change oil; check spark plug.
Uneven cutDull blade, uneven tiresSharpen/replace blade; check tire pressure and height settings.
VibrationLoose blade, bent bladeTighten blade bolt; replace bent blade.
Bag not fillingWet grass, clogged deckMow when grass is dry; clean underside of deck.

Service: For technical support: 1-800-800-7310. Parts: www.murrayparts.com.

Murray Parklander 2690999 Lawn Mower Manual © - All Rights Reserved 2025