Murray MNA152506 Lawn Mower Manual

The Murray MNA152506 is a 150cc, 22-inch push lawn mower featuring a Briggs & Stratton engine, 3-in-1 mulching/bagging/side discharge capability, single-lever height adjustment, durable steel deck, and easy-start technology. This manual covers safety instructions, assembly, operation, maintenance, troubleshooting, and specifications to ensure proper and safe use of your mower.

1. Safety Instructions 2. Assembly Instructions 3. Controls and Features 4. Operation Guide 5. Maintenance Schedule 6. Storage Instructions 7. Troubleshooting 8. Specifications 9. Warranty Information

Safety Instructions

Read all instructions before operating. Failure to follow warnings can result in serious injury or death.

HazardPrecaution
Rotating BladeKeep hands and feet away from mower deck. Disconnect spark plug before maintenance.
Fuel SafetyRefuel outdoors only when engine is cool. Use approved gasoline container.
Slope OperationDo not mow on slopes greater than 15 degrees. Mow across slopes, not up and down.
Debris and ObjectsClear mowing area of stones, toys, and other objects that could be thrown.
Children and PetsKeep bystanders, especially children and pets, at a safe distance.
Electric ShockDo not operate in wet grass or rain to avoid electric shock hazard.
Hot SurfacesAvoid contact with muffler and engine; they become extremely hot during operation.

Assembly Instructions

Unpack all parts and verify contents against the parts list. Assembly requires basic tools (included).

  1. Handle Assembly: Attach lower handle to mower deck using provided bolts and washers. Secure upper handle to lower handle with knobs.
  2. Wheel Installation: Slide wheels onto axles and secure with push nuts or washers and cotter pins as specified.
  3. Height Adjustment Lever: Connect the single-lever linkage to the mower deck according to diagram.
  4. Bagging/Mulching Kit: Attach rear bagger or mulch plug if included. Ensure secure fit.
  5. Oil and Fuel: Add SAE 30 motor oil to engine (check dipstick). Fill fuel tank with fresh, unleaded gasoline.

WARNING! Do not attempt to start the engine until assembly is complete and all parts are securely fastened.

Controls and Features

Familiarize yourself with the location and function of all controls before operation.

Operation Guide

Follow these steps for safe and effective mowing.

  1. Pre-Start Check: Check oil level, fuel level, and tire pressure. Clear mowing area.
  2. Starting Engine: Set height adjustment. Engage engine control lever. Prime bulb. Pull recoil starter firmly.
  3. Mowing: Push mower at a steady pace. Overlap each pass slightly for even cut.
  4. 3-in-1 Function: Use side discharge for tall/wet grass, bagging for clippings collection, or mulching for nutrient return.
  5. Stopping Engine: Release engine control lever. Wait for all moving parts to stop completely.

Tip: Mow when grass is dry for best results. Avoid mowing in the heat of the day to reduce engine strain.

Maintenance Schedule

Regular maintenance ensures long life and optimal performance.

IntervalTask
Before each useCheck oil level, inspect blade for damage, clear deck of debris.
Every 25 hoursChange engine oil (or annually). Clean or replace air filter.
Every seasonSharpen or replace blade. Check spark plug and replace if worn.
As neededLubricate wheel axles and height adjustment points. Check tire pressure.
End of seasonDrain fuel or add stabilizer. Perform complete cleaning.

CAUTION! Always disconnect the spark plug wire before performing any maintenance involving the blade or underside of the deck.

Storage Instructions

Proper storage prevents fuel system issues and corrosion.

  1. Fuel System: Option A: Run engine until it stops to drain carburetor. Option B: Add fuel stabilizer to a full tank and run engine for 5 minutes.
  2. Cleaning: Thoroughly clean the mower deck, underside, and wheels. Allow to dry completely.
  3. Blade Care: Sharpen blade and coat with light oil to prevent rust.
  4. Battery (if electric start): Remove battery and store in a cool, dry place. Charge periodically.
  5. Storage Location: Store in a clean, dry place, protected from the elements.

WARNING! Never store the mower with fuel in the tank indoors or in an enclosed space due to fire and fume hazards.

Troubleshooting

ProblemPossible CauseSolution
Engine will not startEmpty fuel tank, old gasoline, clogged air filter, disconnected spark plug wire.Add fresh fuel, clean/replace air filter, ensure spark plug wire is connected.
Engine runs poorly or stallsDirty spark plug, clogged fuel line, water in fuel.Clean or replace spark plug, drain fuel tank and refill with fresh gasoline.
Uneven cuttingDull or bent blade, uneven tire pressure, clogged deck.Sharpen or replace blade, inflate tires to equal pressure, clean underside of deck.
Excessive vibrationLoose blade, damaged blade, debris stuck in blade.Tighten blade bolt, inspect and replace damaged blade, remove debris.
Mower does not self-propelDrive belt worn or broken, drive control cable loose.Inspect and replace drive belt, adjust drive control cable tension.
Grass not discharging/baggingWet grass, deck clogged, engine speed too low.Mow when grass is dry, clean deck, operate at full throttle.

Specifications

Warranty Information

The Murray MNA152506 Lawn Mower is covered by a limited warranty. Please retain your proof of purchase.

Limited Warranty: 2-year limited warranty for residential use from date of purchase. Covers defects in materials or workmanship. Does not cover normal wear, misuse, neglect, or improper maintenance.

Service: For warranty service or technical support, contact Murray Customer Service at 1-800-XXX-XXXX or visit www.murray.com. Have your model and serial number (located on the mower deck) ready.

Parts: Genuine Murray replacement parts are recommended for all repairs.

Murray MNA152506 Lawn Mower Manual © - All Rights Reserved 2025