Murray M2265HWFC Lawn Mower Manual

The Murray M2265HWFC is a 22-inch, 190cc, 2-in-1 side discharge and mulching push lawn mower. It features a Briggs & Stratton 850 Series engine, 3-in-1 cutting system (mulch, bag, side discharge), 6-position single-lever height adjustment, durable steel deck, easy-start system, and large 2.1 bushel rear bag. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Cutting System Setup 7. Maintenance Schedule 8. Storage Guidelines 9. Safety Information 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 190cc Briggs & Stratton engine, 22-inch steel cutting deck, 3-in-1 cutting system, single-lever height adjustment, rear grass bag, and push handle with controls.

Feature	Description
Engine	190cc Briggs & Stratton 850 Series, 4-cycle
Cutting Width	22 inches
Cutting System	3-in-1 (Mulch, Bag, Side Discharge)
Height Adjustment	Single-lever, 6 positions (1.25" - 3.75")
Deck Material	Durable steel
Grass Bag Capacity	2.1 bushels, rear-mounted
Starting System	Recoil with Easy-Start technology
Wheels	8-inch rear, 7-inch front
Handle	Foldable, adjustable push handle
Fuel Tank Capacity	0.95 quarts

Assembly Instructions

Unpack all parts from the box. Assembly requires basic tools (included).

Attach the handle: Align lower handle sections with deck brackets, secure with bolts and wing nuts.
Install the upper handle: Connect to lower handle using provided bolts and knobs.
Attach the grass bag: Hang bag frame on rear deck hooks; attach fabric bag to frame.
Install the side discharge chute (if not pre-installed): Snap into place on deck opening.
Add engine oil and gasoline: Use SAE 30 oil (approx. 20 oz) and unleaded gasoline.

WARNING! Do not attempt to start the engine before adding oil and fuel. Ensure all bolts are tightened securely.

First-Time Setup

Before first use, complete final checks and adjustments.

Check oil level: Ensure oil is at the full mark on the dipstick.
Add fuel: Fill tank with fresh unleaded gasoline (max 0.95 qt).
Adjust cutting height: Set lever to desired position (middle setting recommended for first mow).
Select cutting mode: Install mulch plug for mulching, bag for collection, or attach side discharge chute.
Start engine: Pull recoil starter cord firmly.

CAUTION! Operate only outdoors in a well-ventilated area. Keep hands and feet away from moving parts.

Specifications

Model: M2265HWFC
Engine: Briggs & Stratton 850 Series, 190cc, 4-cycle
Cutting Width: 22 inches
Cutting Height Range: 1.25 - 3.75 inches (6 positions)
Deck: 22-inch steel, 3-in-1 capability
Bag Capacity: 2.1 bushels
Wheels: 8-inch rear, 7-inch front
Fuel Type: Unleaded gasoline (87 octane or higher)
Oil Type: SAE 30 detergent motor oil (API service class SJ or higher)
Weight: Approximately 65 lbs

Controls and Operation

Handle Controls: Engine control lever (must be held to run), recoil starter grip, height adjustment lever.

Starting Procedure:

Check oil and fuel levels.
Move engine control lever to RUN position.
Prime engine (if equipped) by pressing primer bulb 3 times.
Pull recoil starter cord briskly.

Stopping: Release engine control lever. Engine will stop. For emergency stop, release lever immediately.

Height Adjustment: Move single lever to one of 6 positions. Ensure all wheels are at same height.

Cutting System Setup

3-in-1 System allows mulching, bagging, or side discharge.

Mulching: Install mulch plug into rear discharge opening. Grass clippings are cut finely and returned to lawn.
Bagging: Remove mulch plug, attach grass bag assembly to rear hooks.
Side Discharge: Remove mulch plug and bag, attach side discharge chute to deck opening.

Tip: For best mulching results, mow when grass is dry and do not cut more than 1/3 of grass height at once.

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

Maintenance Task	Frequency
Check engine oil level	Before each use
Clean underside of deck	After each use
Check blade sharpness/balance	Every 25 hours
Replace air filter	Every season or 25 hours
Change engine oil	First 5 hours, then every 50 hours or season
Replace spark plug	Every 100 hours or season
Lubricate wheels and height adjuster	Every 25 hours

WARNING! Always disconnect spark plug wire before performing any maintenance.

Storage Guidelines

Proper storage prevents fuel system issues and corrosion.

Drain or stabilize fuel: Run engine dry or add fuel stabilizer.
Change oil: Replace with fresh oil before long-term storage.
Clean thoroughly: Remove grass clippings from deck, wheels, and engine.
Store blade: Sharpen and balance blade before storage.
Cover: Store in a dry, covered area.

CAUTION! Never store mower with fuel in tank indoors or near open flame.

Safety Information

Read and understand all safety instructions before operation.

Always wear sturdy footwear and eye protection.
Clear mowing area of stones, sticks, and debris.
Do not mow wet grass.
Never leave mower unattended with engine running.
Keep children and pets away from mowing area.
Stop engine and disconnect spark plug before unclogging or maintenance.
Use extreme caution when mowing on slopes.

DANGER! Rotating blade can cause severe injury. Keep hands and feet away from deck at all times.

Warranty Information

The Murray M2265HWFC is covered by a limited warranty. For residential use: 2-year limited warranty on mower, 2-year limited warranty on engine (Briggs & Stratton). Commercial use may have different terms. Proof of purchase required. Warranty does not cover normal wear, misuse, or lack of maintenance. For warranty service, contact Murray customer service at 1-800-800-7310 or visit www.murray.com. Keep this manual and purchase receipt for warranty claims.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine will not start	No fuel, old fuel, spark plug wire disconnected, clogged air filter	Add fresh fuel, connect spark plug wire, clean/replace air filter.
Engine runs poorly or stalls	Dirty air filter, old gasoline, clogged fuel line	Clean air filter, drain and replace fuel, check fuel line.
Uneven cutting	Dull blade, uneven tire pressure, deck clogged	Sharpen/balance blade, check tire pressure, clean deck.
Excessive vibration	Loose blade, bent blade, unbalanced blade	Tighten blade bolt, replace bent blade, balance blade.
Grass not discharging properly	Wet grass, deck clogged, engine speed too low	Mow when dry, clean deck, operate at full throttle.
Wheels not turning freely	Debris in axles, lack of lubrication	Clean axles, lubricate with light oil.

For Service: 1-800-800-7310; www.murray.com