Murray LE320E Lawn Mower Manual

The Murray LE320E is a 3.5 HP, 21-inch push lawn mower featuring a Briggs & Stratton engine, 2-in-1 side discharge/mulching capability, 6-position single-lever height adjustment, durable steel deck, and easy-fold handle for compact storage. This manual covers safety, assembly, operation, maintenance, troubleshooting, and specifications to ensure proper and safe use of your lawn mower.

Features at a Glance

Key components: Briggs & Stratton 3.5 HP engine, 21-inch steel cutting deck, 2-in-1 discharge system, single-lever height adjustment, foldable handle, rear grass bag.

Assembly Instructions

Unpack all parts and inspect for damage. Assembly requires basic tools (included).

1. Attach the handle: Align handle brackets with deck mounts, secure with provided bolts and wing nuts.
2. Install the wheels: Slide wheels onto axles, secure with push-on caps or washers and cotter pins.
3. Attach the grass bag: Hook bag onto rear discharge chute or bagging adapter.
4. Install the discharge chute: Secure side discharge chute to deck opening (if not pre-installed).
5. Add oil and gasoline: Fill engine with SAE 30 oil (check dipstick) and unleaded gasoline.

WARNING! Do not add gasoline indoors or near open flames. Ensure all fasteners are tight before operation.

Safety Precautions

Always follow safety guidelines to prevent injury or damage.

1. Read manual thoroughly before use.
2. Clear mowing area of stones, sticks, and debris.
3. Wear sturdy shoes, eye protection, and long pants.
4. Do not operate on wet grass or steep slopes.
5. Never allow children or pets near mower during operation.
6. Disconnect spark plug wire before performing maintenance.
7. Stop engine and wait for blades to stop before crossing driveways or gravel.

CAUTION! Gasoline is flammable. Store fuel in approved container away from heat sources.

Specifications

• Model: Murray LE320E
• Engine: Briggs & Stratton 3.5 HP, 4-cycle
• Cutting Width: 21 inches
• Cutting Heights: 1.0" to 3.5" (6 positions)
• Deck: Steel, 2-in-1 side discharge/mulching
• Wheels: 8-inch rear, 7-inch front
• Fuel Type: Unleaded gasoline (minimum 87 octane)
• Oil Type: SAE 30 (summer), 5W-30 (winter)
• Weight: 55 lbs (approx.)
• Warranty: 2-year limited

Controls and Operation

Handle Controls: Throttle lever, drive control bar (if self-propelled model), height adjustment lever.

Starting: 1. Check oil and fuel levels. 2. Move throttle to FAST position. 3. Prime engine (if equipped). 4. Pull recoil starter firmly. Stopping: Release drive control, move throttle to STOP, disconnect spark plug wire for safety.

Operation: Push mower at steady pace; overlap passes slightly for even cut. For bagging, attach grass bag; for mulching, install mulch plug (if required).

Cutting Height Adjustment

Single-lever adjustment changes height for all four wheels simultaneously.

1. Stop engine and wait for blade to stop.
2. Pull lever outward and move to desired position (1-6).
3. Release lever to lock into place.
4. Test on small area to ensure desired height.

Tip: Cut only 1/3 of grass blade length at a time. Adjust height seasonally (higher in summer heat).

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

WARNING! Always disconnect spark plug before performing any maintenance.

Engine Care

Briggs & Stratton engine requires proper care for reliable operation.

1. Oil: Check level before each use; change every 25 hours or seasonally.
2. Air Filter: Clean foam pre-cleaner every 25 hours; replace paper element if dirty.
3. Spark Plug: Clean and gap (0.030") annually; replace if worn.
4. Fuel: Use fresh unleaded gasoline; add fuel stabilizer for storage over 30 days.
5. Cooling Fins: Keep clean to prevent overheating.

CAUTION! Do not run engine without air filter. Use only recommended oil and fuel types.

Storage Guidelines

Proper storage prevents damage and extends mower life.

1. Clean mower thoroughly, especially underside of deck.
2. Drain fuel or add stabilizer and run engine 5 minutes.
3. Change oil and replace air filter if due.
4. Remove spark plug, add teaspoon of oil to cylinder, pull starter slowly to coat.
5. Store in dry, covered area; fold handle to save space.

Tip: Store mower on level surface with tires inflated to prevent flat spots.

Warranty Information

Murray LE320E includes a 2-year limited warranty covering defects in materials or workmanship. Warranty does not cover normal wear, misuse, or lack of maintenance. Proof of purchase required. For warranty service, contact authorized Murray service center or call 1-800-XXX-XXXX. Keep this manual and receipt for reference.

Troubleshooting

Service: For repairs, use authorized Murray service centers. Visit www.murray.com or call 1-800-XXX-XXXX.