Murray 425014X92E Lawn Mower Manual

The Murray 425014X92E is a 21-inch push lawn mower featuring a 190cc Briggs & Stratton engine, 3-in-1 mulching/bagging/side discharge capability, single-lever height adjustment (6 positions from 1.25" to 3.75"), durable steel deck, easy-start system, and rear bagger with 2.1 bushel capacity. Designed for residential use with safety features including blade control handle and operator presence control. Below are key sections for safety, features, assembly, operation, maintenance, troubleshooting, and specifications.

1. Features at a Glance 2. Assembly Instructions 3. Safety Information 4. Specifications 5. Controls and Operation 6. Cutting Height Adjustment 7. 3-in-1 Function Setup 8. Maintenance Schedule 9. Storage & Winterization 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 190cc Briggs & Stratton engine, 21-inch steel cutting deck, Rear grass bagger, Single-lever height adjuster, Blade control handle with safety key, 3-in-1 discharge system.

Feature	Description
Engine	190cc Briggs & Stratton 675 Series, OHV
Cutting Width	21 inches
Cutting Height	6 positions (1.25" - 3.75")
Deck Material	Durable powder-coated steel
Discharge Options	Mulch, Bag, Side Discharge (3-in-1)
Bag Capacity	2.1 bushels (rear bag)
Starting System	Recoil start with primer bulb
Wheels	8-inch rear, 7-inch front
Handle	Foldable, adjustable comfort grip
Weight	Approximately 65 lbs

Assembly Instructions

Unpack and inspect all parts. Assembly requires basic tools (included).

Attach handle: Insert lower handle into deck brackets, secure with bolts and wing nuts.
Install upper handle: Connect to lower handle, secure with provided hardware.
Attach grass bag: Hook bag frame onto rear deck mounts; ensure secure attachment.
Install side discharge chute (if not pre-installed): Snap into opening on right side of deck.
Add engine oil: Fill with SAE 30 detergent oil (approx. 20 oz) – check dipstick.
Add gasoline: Use fresh unleaded gasoline (87 octane minimum).

WARNING! Do not attempt to start engine before adding oil and gasoline. Keep hands clear of cutting blade during assembly.

Safety Information

Read all instructions before operation. Always wear appropriate safety gear.

Clear mowing area: Remove stones, toys, and other objects that could be thrown.
Operator presence: Blade control handle must be held down for blade to rotate.
Children and pets: Keep at a safe distance while mower is operating.
Slopes: Do not mow on steep slopes; mow across slopes, not up and down.
Refueling: Allow engine to cool before adding fuel; outdoors only.
Blade safety: Disconnect spark plug before inspecting or servicing blade.

DANGER! Rotating blade can cause severe injury. Never place hands or feet under deck while engine is running.

Specifications

Model: Murray 425014X92E
Engine: Briggs & Stratton 190cc, 675 Series, OHV
Cutting Width: 21 inches
Cutting Height Range: 1.25" to 3.75" (6 positions)
Deck Construction: 20-gauge steel, powder-coated
Discharge System: 3-in-1 (Mulch/Bag/Side Discharge)
Bag Capacity: 2.1 bushels
Wheel Size: Front 7", Rear 8"
Fuel Tank Capacity: 1.0 quart
Oil Capacity: 20 oz (SAE 30)
Weight: 65 lbs (approx.)
Warranty: 2-year limited

Controls and Operation

Blade Control Handle: Must be held against handle to engage blade. Release to stop blade. Throttle Control: Located on engine (often "Fast" and "Slow" positions). Primer Bulb: Press 3 times for cold starts. Recoil Starter: Pull firmly to start engine. Height Adjustment Lever: Single lever adjusts all four wheels simultaneously.

Starting Procedure: 1. Check oil and fuel levels. 2. Move throttle to "Fast" position. 3. Press primer bulb 3 times. 4. Hold blade control handle against handle. 5. Pull starter rope briskly.

Stopping: Release blade control handle to stop blade. Move throttle to "Stop" position to stop engine.

Cutting Height Adjustment

Single-lever adjustment for all four wheels.

Stop engine and ensure blade has stopped rotating.
Locate adjustment lever on each wheel or central lever near deck.
Pull lever outward and move to desired height setting (1-6).
Release lever to lock in position.
Verify all wheels are at same height by checking deck level.

Tip: For first mow of season, set to highest setting. Gradually lower for subsequent mows.

3-in-1 Function Setup

Configure mower for mulching, bagging, or side discharge.

Mulching: Install mulch plug (covers discharge opening). Grass clippings are recut and returned to lawn.
Bagging: Remove mulch plug, attach grass bag to rear mounts. Ensure bag is securely fastened.
Side Discharge: Remove mulch plug and bag. Install side discharge chute (if not permanent).

WARNING! Always stop engine before changing discharge configuration. Ensure all parts are properly secured before operation.

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

Maintenance Task	Frequency
Check engine oil level	Before each use
Check blade condition	Every 25 hours
Clean underside of deck	After each use (when cool)
Replace air filter	Every season or 25 hours
Replace spark plug	Every season or 100 hours
Sharpening blade	Every season or when dull
Change engine oil	First 5 hours, then every season or 50 hours

CAUTION! Always disconnect spark plug wire before performing any maintenance.

Storage & Winterization

Proper storage prevents fuel system issues and corrosion.

Run engine to burn remaining fuel in carburetor, or add fuel stabilizer.
Change engine oil at end of season.
Clean entire mower, especially underside of deck.
Remove spark plug, add 1 tablespoon of oil to cylinder, pull starter slowly to distribute.
Store in clean, dry place, preferably covered.

CAUTION! Never store mower with fuel in tank indoors or in enclosed spaces.

Warranty Information

Murray 425014X92E includes a 2-year limited warranty covering defects in materials and workmanship under normal residential use. Warranty does not cover commercial use, neglect, improper maintenance, or normal wear items (blades, belts, etc.). Proof of purchase required. For warranty service, contact Murray customer service at 1-800-800-7310 or visit www.murray.com. Keep this manual and purchase receipt for warranty validation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	No fuel, old gas, clogged air filter, spark plug issue	Check fuel level; use fresh gas; clean/replace air filter; check spark plug.
Engine runs poorly	Dirty air filter, old gasoline, water in fuel	Replace air filter; drain and replace fuel; add fuel stabilizer.
Uneven cutting	Dull blade, uneven tire pressure, deck not level	Sharpen or replace blade; check tire pressure; level deck.
Excessive vibration	Loose blade, bent blade, debris in blade area	Tighten blade bolt; replace bent blade; clean under deck.
Bag not filling	Wet grass, deck clogged, engine speed too low	Mow when grass is dry; clean deck; run engine at full throttle.
Wheels not turning	Debris around axles, damaged wheel bearings	Clean axle areas; replace wheels if bearings are damaged.

Service: For technical support, call 1-800-800-7310 or visit www.murray.com.