Murray 20112X92E0 Lawn Mower Manual

The Murray 20112X92E0 is a 21-inch push lawn mower featuring a 190cc Briggs & Stratton engine, 3-in-1 mulching/bagging/side discharge capability, single-lever height adjustment, durable steel deck, easy-start system, and rear-wheel drive. This manual covers essential safety instructions, assembly, operation, maintenance, troubleshooting, and storage guidelines for optimal performance and longevity.

1. Features at a Glance 2. Assembly Instructions 3. Safety Precautions 4. Specifications 5. Controls and Operation 6. Cutting Height Adjustment 7. Maintenance Schedule 8. Engine Care 9. Storage Guidelines 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 190cc Briggs & Stratton engine, 21-inch steel cutting deck, rear bagger, mulching plug, side discharge chute, single-lever height adjustment, 8-inch rear wheels, recoil start system.

FeatureDescription
Engine190cc Briggs & Stratton 4-cycle, OHV
Cutting Width21 inches
Cutting Options3-in-1 (Mulch, Bag, Side Discharge)
Deck MaterialDurable powder-coated steel
Height AdjustmentSingle lever, 6 positions (1.5" - 3.75")
Wheels8-inch rear, 7-inch front
Start SystemRecoil pull-start
Drive SystemRear-wheel drive
Fuel Tank Capacity0.95 quarts (0.9 liters)
Oil Capacity20 oz (0.6 liters)

Assembly Instructions

Unpack all parts and inspect for damage. Assembly requires basic tools (included).

  1. Attach handle: Align lower handle with deck brackets, secure with provided bolts and washers.
  2. Install upper handle: Connect to lower handle, tighten wing nuts.
  3. Attach grass bag: Hook bag frame onto rear deck brackets, ensure secure latch.
  4. Install side discharge chute: Attach to deck opening, secure with wing nut.
  5. Add mulching plug: Insert into rear discharge opening when mulching.
  6. Check wheels: Ensure all wheels are properly seated and secured.

WARNING! Always wear gloves during assembly. Keep hands clear of cutting blade area.

Safety Precautions

Read all instructions before operation. Failure to follow safety rules may result in serious injury.

  1. Clear mowing area of stones, sticks, wire, and other objects that could be thrown.
  2. Always wear substantial footwear and long pants. Do not operate barefoot or in sandals.
  3. Do not mow in reverse unless absolutely necessary. Always look behind and down.
  4. Never allow children or pets in mowing area. Keep bystanders at a safe distance.
  5. Stop engine and disconnect spark plug wire before clearing blockages or performing maintenance.
  6. Use extreme caution when mowing on slopes. Mow across slopes, not up and down.

DANGER! The blade rotates at high speed and can cause severe injury. Keep hands and feet away.

Specifications

Controls and Operation

Familiarize yourself with all controls before starting.

Handle Controls: Drive control lever (engage wheels), Blade control lever (engage blade), Height adjustment lever.

Engine Controls: Throttle control (FAST/SLOW/STOP), Choke control (cold starts), Recoil starter grip.

  1. Starting: Move throttle to FAST, set choke for cold engine, pull starter cord firmly.
  2. Engaging Blade: With engine running, press and hold blade control lever against handle.
  3. Engaging Drive: Press drive control lever against handle to propel mower forward.
  4. Stopping: Release both control levers, move throttle to STOP.

Tip: Always start engine outdoors. Never operate in enclosed spaces due to carbon monoxide risk.

Cutting Height Adjustment

Adjust all four wheels simultaneously with the single lever.

  1. Stop engine and ensure blade has completely stopped.
  2. Locate height adjustment lever on right side of deck.
  3. Pull lever outward and move to desired position (1-6).
  4. Release lever to lock into position.
  5. Verify all wheels are at same height by checking clearance.

Recommended Settings: Position 3 (approx. 2.5") for normal lawns, higher for uneven terrain, lower for fine lawns.

Maintenance Schedule

Regular maintenance ensures optimal performance and extends mower life.

IntervalTask
Before each useCheck oil level, inspect blade for damage, clear deck of debris
Every 25 hoursChange engine oil (more frequently in dusty conditions)
Every seasonReplace air filter, spark plug, sharpen or replace blade
As neededClean underside of deck, check wheel bolts and handle hardware
StorageDrain fuel or add stabilizer, clean entire mower

CAUTION! Always disconnect spark plug wire before performing any maintenance.

Engine Care

Proper engine maintenance is critical for reliable operation.

  1. Oil Change: Run engine briefly to warm oil. Drain via dipstick tube or drain plug. Refill with SAE 30 (20 oz).
  2. Air Filter: Remove cover, clean foam pre-cleaner in soapy water, replace paper filter if dirty.
  3. Spark Plug: Remove and clean. Gap to 0.030 inches. Replace annually.
  4. Fuel System: Use fresh unleaded gasoline. Add fuel stabilizer for storage over 30 days.
  5. Carburetor: Adjust only if engine runs poorly. Refer to engine manual for specific settings.

WARNING! Engine and muffler become extremely hot. Allow to cool before touching.

Storage Guidelines

Proper storage prevents fuel system issues and corrosion.

  1. Clean entire mower thoroughly, especially underside of deck.
  2. Drain fuel tank or add fuel stabilizer and run engine for 5 minutes.
  3. Change engine oil at end of season.
  4. Remove spark plug, add 1 tablespoon of oil to cylinder, pull starter slowly to distribute, reinstall plug.
  5. Store in clean, dry place, preferably covered.
  6. Consider removing battery (if electric start model) and storing separately.

CAUTION! Never store mower with fuel in tank indoors or near open flame.

Warranty Information

Murray mowers are backed by a limited warranty. The 190cc Briggs & Stratton engine is covered by a separate manufacturer's warranty.

Warranty requires proof of purchase and proper maintenance. Damage from neglect, abuse, or commercial use voids warranty. For warranty service, contact an authorized Murray service center or call 1-800-269-6215. Keep your receipt in a safe place.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startEmpty fuel tank, old fuel, clogged air filter, faulty spark plugAdd fresh fuel, clean/replace air filter, check/replace spark plug.
Engine runs poorlyDirty air filter, old fuel, clogged fuel lineClean air filter, drain old fuel, check fuel line for obstructions.
Uneven cuttingDull blade, uneven tire pressure, deck cloggedSharpen blade, check tire pressure, clean underside of deck.
Excessive vibrationDamaged or unbalanced blade, loose hardwareStop engine immediately. Check blade for damage and balance. Tighten all bolts.
Mower doesn't driveDrive cable disconnected or brokenCheck drive cable adjustment and connection at transmission.
Grass not dischargingWet grass, deck clogged, engine speed too lowMow when grass is dry, clean deck, run engine at FAST setting.

For Technical Support: 1-800-269-6215 (Monday-Friday, 8am-5pm CST)

Online Resources: www.murray.com | www.briggsandstratton.com

Murray 20112X92E0 Lawn Mower Manual © - All Rights Reserved 2025